All About AC Repair Daily News

A Step-by-Step Guide to Air Conditioner Installation

Oct 28

air conditioning installation Lynn Haven FLIf you're like most people, the thought of installing an air conditioner probably doesn't fill you with excitement. In fact, it might even make you a little queasy. After all, AC installation is not exactly a DIY project. Unless, of course, you're a professional.

But don't worry, we're here to help. This step-by-step guide on air conditioning installation Lynn Haven FL will show you how to install an air conditioner like a pro.

Choose the Right Air Conditioner for Your Space

Before you start shopping for an air conditioner, you need to know what size you need. Air conditioners are measured in British Thermal Units (BTUs). To find the BTU rating that's right for your space, use this formula:

  • For rooms up to 400 square feet: 9,000 BTUs
  • For rooms between 400 and 600 square feet: 12,000 BTUs
  • For rooms between 600 and 1,000 square feet: 18,000 BTUs
  • For rooms between 1,000 and 1,200 square feet: 21,000 BTUs
  • For rooms larger than 1,200 square feet: 24,000 BTUs per 600 square feet

Choose the Right Location

The first step in installing your air conditioner is to choose the right location. You'll want to find a spot that's level and well-ventilated. Avoid placing your AC unit in direct sunlight or near any heat source, as this can damage the unit and reduce its efficiency.

Prepare the Area

Once you've selected the perfect location for your AC unit, it's time to prepare the area. Begin by clearing away any debris or obstacles that might block airflow to the unit. Then, use a level to make sure the ground is level.

If it's not, use shims to level it out. Once the area is prepped and ready to go, you can move on to the next step.

Install the Mounting Bracket

The next step in air conditioning installation Lynn Haven FL is to install the mounting bracket that came with your AC unit. First, use a drill to create pilot holes in the chosen location. Then, insert the lag bolts that came with the bracket and tighten them until they're snug.

Be careful not to over-tighten the bolts, as this could damage the bracket or cause it to become dislodged.

Hang the Condensing Unit

Now it's time to hang the condensing unit on the mounting bracket. Start by attaching the top hooks of the condensing unit onto the bracket. Then, lift the bottom of the unit into place and secure it with bolts. 

Once again, be careful not to over-tighten these bolts, as they could damage your AC unit.

Connect the Electrical Wirings

After your condensing unit is securely in place, you can begin connecting electrical wiring. First, connect any loose wiring from the disconnect box to their respective terminals on your AC unit. Make sure all connections are tight and secure before moving on.

Next, connect one end of your ground wire clamp onto a green screw terminal. Then, attach the other end of clamp around bare copper grounding wire. Finally, plug your AC unit into a power outlet and flip on the switch at your circuit breaker box.

At this point, your AC unit should be up and running!  However, if you experience any problems, be sure to consult with an air conditioning installation Lynn Haven FL professional before proceeding.

Installing an air conditioner might seem like a daunting task, but we promise it's not as complicated as it seems. With this step-by-step guide, you can install an AC unit like a pro—no experience necessary! Just be sure to take all safety precautions into account and always consult with a professional if you have any questions or concerns along the way.

Feel free to contact Alexander Air Conditioning for air conditioning installation Lynn Haven FL! Call them at (850) 493- 6448 today!